Project

General

Profile

Can not receive calls

Added by muhammad waqas almost 5 years ago

Heay all,
I have configured gouatodial v4 , registered SIP , But can't receive calls. Can somebody help me to create right inbound route or any other configuration to land the call to ivr

Thanks


Replies (7)

RE: Can not receive calls - Added by Jackie Alfonso almost 5 years ago

muhammad waqas wrote:

Heay all,
I have configured gouatodial v4 , registered SIP , But can't receive calls. Can somebody help me to create right inbound route or any other configuration to land the call to ivr

Thanks

Hi Muhammad,

Can you please double check your carrier settings. please check some settings here https://goautodial.org/projects/goautodialce/wiki/Carrier_Sample_Configuration

Thank you!

RE: Can not receive calls - Added by muhammad waqas almost 5 years ago

Heay Jackie,
Thanks you so much for your reply.
I am posting my carrier setting . Please let me know where I have done some mistake,

register => 922137134777lbo::5060/922137134777lbo

username=922137134777lbo
type=peer
secret=bilawal.4777
qualify=yes
insecure=port,invite
outboundproxy=125.209.93.196:5083
outboundproxyport=5083
port=5083
host=multinet.pri
fromdomain=multinet.pri
canreinvite=no
allow=ulaw&alaw

exten => _9237134777.,1,AGI
exten => _9237134777.,2,Dial(SIP/${EXTEN:10}@002,,tTo)
exten => _9237134777.,3,Hangup

One again thanks for your support.

RE: Can not receive calls - Added by muhammad waqas almost 5 years ago

I have found one more thing, Call is arriving to the system but rejecting with error extension not found in context default.

error.JPG (16.8 KB) error.JPG

RE: Can not receive calls - Added by Levy Ryan Nolasco almost 5 years ago

Hi,

Please DO NOT post your exact carrier settings. Never include the username, password or even the Public IP of your dialer. Also, post your entire asterisk log when attempting a call on your inbound number. This way we could help you better.

Try adding this on your carrier entry

context=trunkinbound

RE: Can not receive calls - Added by muhammad waqas almost 5 years ago

Alright thanks for your suggestion and really appreciate.
secondly I have tried context=trunkinbound as well. but still having the same issue,

RE: Can not receive calls - Added by muhammad waqas almost 5 years ago

I am getting this warning as well on asterisk cLi

WARNING1675: acl.c:939 ast_ouraddrfor: Cannot connect to (null): Invalid argument

RE: Can not receive calls - Added by Wittie Manansala almost 5 years ago

Hi,

Please provide us complete asterisk cli log when making calls.

Thanks

    (1-7/7)
    Go to top