Project

General

Profile

can i use goautodial v4 with vicidial on same server

Added by sea web over 4 years ago

we have installed goautodial v4 on server and will test it, in the old version 3.3 CE goautodial theme was installed together with vici frontend but in v4 we dont see this, how we can install vicidial last svn version on the same server where goautodial v4 working ? we need to make settings on vicidial which cant be done on goautodial and we want to use them together on same server if possible.


Replies (19)

RE: can i use goautodial v4 with vicidial on same server - Added by Demian Biscocho over 4 years ago

Yes, it's possible. Just install the Vici web files and disable password encryption in your Vicidial settings (to be able to login the Vici admin page).

RE: can i use goautodial v4 with vicidial on same server - Added by sea web over 4 years ago

thank you , in goautodialv4 files we see vicifiles already installed on usr/src/ folder but please can you explain me more clear where to install vici web files ? in which folder and how to open it on browser ?

RE: can i use goautodial v4 with vicidial on same server - Added by sea web over 4 years ago

we want to use vicidial together with goautodial v4 because of vici has more reports, and if we install vicidial on v4 , all vici reports will work on asterisk ?

RE: can i use goautodial v4 with vicidial on same server - Added by Demian Biscocho over 4 years ago

pixel tech wrote:

we want to use vicidial together with goautodial v4 because of vici has more reports, and if we install vicidial on v4 , all vici reports will work on asterisk ?

Test it and let us know if all reports work.

RE: can i use goautodial v4 with vicidial on same server - Added by sea web over 4 years ago

we dont know how to make vici working with goautodial after install we will test it

Demian Lizandro Biscocho wrote:

pixel tech wrote:

we want to use vicidial together with goautodial v4 because of vici has more reports, and if we install vicidial on v4 , all vici reports will work on asterisk ?

Test it and let us know if all reports work.

RE: can i use goautodial v4 with vicidial on same server - Added by sea web over 4 years ago

nobody has step by step guide about how to install vicidial on goautodial v4 ? we need vicidial reports to use with goautodial.

RE: can i use goautodial v4 with vicidial on same server - Added by Sujan Subedi over 4 years ago

Demian Lizandro Biscocho wrote:

Yes, it's possible. Just install the Vici web files and disable password encryption in your Vicidial settings (to be able to login the Vici admin page).

Hi Demian,

Could you please shed some more light in it, as you have mentioned "disable password encryption in your Vicidial settings" - is that in one of the conf/php file from the vicidial web as viciDIAL Settings can not be accessed if one can't login to admin page.

It would be nice to have both running, especially for few backend functionalities.

Your help will be appreciated.

RE: can i use goautodial v4 with vicidial on same server - Added by Levy Ryan Nolasco over 4 years ago

Hi,

You can disable it via mysql and check the asterisk database > system settings then look for the pass hash.

RE: can i use goautodial v4 with vicidial on same server - Added by Sujan Subedi over 4 years ago

Levy Ryan Nolasco wrote:

Hi,

You can disable it via mysql and check the asterisk database > system settings then look for the pass hash.

Hi Levy,

Thanks for the response.
Did follow this [[https://goautodial.org/boards/2/topics/14852]], and upon executing

MariaDB [asterisk]>update system_settings set pass_hash_enabled=0; 

it broke the normal goautodial login too, try inserting plain password for goadmin but didn't help either.
If someone has done this successfully before , let me know.

Thanks.

RE: can i use goautodial v4 with vicidial on same server - Added by Levy Ryan Nolasco over 4 years ago

Hi,

You first need to do this as posted on the link.

You need to put in the plaintext passwords in the "pass" column in the vicidial_users table and disable password encryption to make Vicidial work. 

RE: can i use goautodial v4 with vicidial on same server - Added by Sujan Subedi over 4 years ago

Levy Ryan Nolasco wrote:

Hi,

You first need to do this as posted on the link.

[...]

Hi Levy,

Of course I did that, please see the screenshot below. The main issue as I mentioned in earlier thread that it won't now let you login to Goautodial with goadmin user or any other user for that matter - not with plain password, not with encrypted or default password. Restoring the database from source will solve the login issue, but this should not have been advised if it break things down.

Would you be able to test once and advise if that's practically doable for you as might have few test instances running. Will appreciate.

Cheers.

pass_hash.png (13.1 KB) pass_hash.png pass_hash

RE: can i use goautodial v4 with vicidial on same server - Added by Levy Ryan Nolasco over 4 years ago

Hi,

If pass_hash_enabled is disabled you can only login to Vicidial. For you to be able to login to GOautodial you need to enable it again. Hope it helps.

RE: can i use goautodial v4 with vicidial on same server - Added by Sujan Subedi over 4 years ago

Levy Ryan Nolasco wrote:

Hi,

If pass_hash_enabled is disabled you can only login to Vicidial. For you to be able to login to GOautodial you need to enable it again. Hope it helps.

Oh ok, got it. Same as other users, "sea web" and apparently "me" wanted to check if it's possible to run gad4 and vici together on same server the way earlier versions used to work. So the first answer of the thread should have been "No, you can not use goautodial v4 with vicidial simultaneously on the same server", rather than going in circle with some arbitrary suggestions.
Anyways, I would appreciate if someone tinkers more and get this working, even I'll keep trying and post-back if successful.

Thanks.

RE: can i use goautodial v4 with vicidial on same server - Added by Demian Biscocho over 4 years ago

Levy Ryan Nolasco wrote:

Hi,

If pass_hash_enabled is disabled you can only login to Vicidial. For you to be able to login to GOautodial you need to enable it again. Hope it helps.

Yes, you can. If pass_hash_enabled is set to "0", you can still login to your GOautodial server as long as the "pass" column in vicidial_users table has the corresponding plaintext password entries.

This means you can user both Vicidial and GOautodial on the same server.

RE: can i use goautodial v4 with vicidial on same server - Added by Sujan Subedi over 4 years ago

Demian Lizandro Biscocho wrote:

Levy Ryan Nolasco wrote:

Hi,

If pass_hash_enabled is disabled you can only login to Vicidial. For you to be able to login to GOautodial you need to enable it again. Hope it helps.

Yes, you can. If pass_hash_enabled is set to "0", you can still login to your GOautodial server as long as the "pass" column in vicidial_users table has the corresponding plaintext password entries.

This means you can user both Vicidial and GOautodial on the same server.

Still doesn't work Levy - as I mentioned earlier, setting up pass_hash_enabled to "0" and setting plaintext password in vicidial_users table doesn't let user/admin logon neither to VICIdial nor goautodial. There must be other explanation to it. I really want to hear back from other people who had success in doing so. Thank you anyway.

RE: can i use goautodial v4 with vicidial on same server - Added by Levy Ryan Nolasco over 4 years ago

Sujan Subedi wrote:

Demian Lizandro Biscocho wrote:

Levy Ryan Nolasco wrote:

Hi,

If pass_hash_enabled is disabled you can only login to Vicidial. For you to be able to login to GOautodial you need to enable it again. Hope it helps.

Yes, you can. If pass_hash_enabled is set to "0", you can still login to your GOautodial server as long as the "pass" column in vicidial_users table has the corresponding plaintext password entries.

This means you can user both Vicidial and GOautodial on the same server.

Still doesn't work Levy - as I mentioned earlier, setting up pass_hash_enabled to "0" and setting plaintext password in vicidial_users table doesn't let user/admin logon neither to VICIdial nor goautodial. There must be other explanation to it. I really want to hear back from other people who had success in doing so. Thank you anyway.

Hi,

Checking your httpd logs might help you why you are unable to login to admin portal. Post more details or dig in deeper.

RE: can i use goautodial v4 with vicidial on same server - Added by Kevin C almost 4 years ago

Sujan Subedi wrote:

Demian Lizandro Biscocho wrote:

Levy Ryan Nolasco wrote:

Hi,

If pass_hash_enabled is disabled you can only login to Vicidial. For you to be able to login to GOautodial you need to enable it again. Hope it helps.

Yes, you can. If pass_hash_enabled is set to "0", you can still login to your GOautodial server as long as the "pass" column in vicidial_users table has the corresponding plaintext password entries.

This means you can user both Vicidial and GOautodial on the same server.

Still doesn't work Levy - as I mentioned earlier, setting up pass_hash_enabled to "0" and setting plaintext password in vicidial_users table doesn't let user/admin logon neither to VICIdial nor goautodial. There must be other explanation to it. I really want to hear back from other people who had success in doing so. Thank you anyway.

This will explain everything you need to know. https://goautodial.org/boards/3/topics/18504?r=18507

RE: can i use goautodial v4 with vicidial on same server - Added by Kevin C almost 4 years ago

Sujan Subedi wrote:

Levy Ryan Nolasco wrote:

Hi,

If pass_hash_enabled is disabled you can only login to Vicidial. For you to be able to login to GOautodial you need to enable it again. Hope it helps.

Oh ok, got it. Same as other users, "sea web" and apparently "me" wanted to check if it's possible to run gad4 and vici together on same server the way earlier versions used to work. So the first answer of the thread should have been "No, you can not use goautodial v4 with vicidial simultaneously on the same server", rather than going in circle with some arbitrary suggestions.
Anyways, I would appreciate if someone tinkers more and get this working, even I'll keep trying and post-back if successful.

Thanks.

I felt the same way you did and solved the problem with explanations as to why and how.

See https://goautodial.org/boards/3/topics/18504?r=18507

    (1-19/19)
    Go to top