Docker and Goautodial , Registration Failed - Rejected
Added by beshoo beshoo 10 months ago
Dear All,
First of all, thank you for this great software (I hope it will works with me)
After overcoming numerous challenges, I have successfully installed your program in a Docker container and linked my domain to the container.
However, I am having difficulty understanding how the program operates within a Docker container. For your reference, here is the command I used to run the container:
```
docker run -d -it --privileged -p 8090:443 -p 5060:5060/udp -p 5060:5060 -p 5070:5070/udp -p 5070:5070 -p 4443:4443 -v /etc/ssl/certs_backup:/etc/ssl/certs/ --name=callcenter 63aafe564c6b /usr/sbin/init
```
As you can see, I have shared ports 5060, 5070, and 4443. Therefore, any connection going to reply.viralcaption.com:[PORT] will be forwarded to the Docker container.
please note that the docker public Ip is " 172.17.0.2"
and all Ports are routed to 172.17.0.2 container
So the WebRTC has to work correctly.
Now get back to the configuration file, I search the forum and here is the settings you usually asked for:
asterisk -rx "sip show peers"
Name/username Host Dyn Forcerport Comedia ACL Port Status Description
kamailio 104.254.128.211 Yes Yes 5060 OK (155 ms)
Am not sure what is this 104.254.128.211 Ip address, it is not my server IP address at all! nor doker IP address
1. GoAdmin Server Settings
2. Asterisk CLI during agent logging in
3. nano /var/www/html/php/Config.php
4. nano /var/www/html/php/goCRMAPISettings.php
5. nano /etc/kamailio/kamailio.cfg
6. nano /etc/rtpengine/rtpengine.conf
7. nano /etc/asterisk/sip.conf
8. GoAdmin Administration Settings & GoWebRTC Settings
9. ifconfig output
1- I don't understand how to Asterisk CLI during agent logging in, since when i
asterisk -r
Nothing happened...
3. nano /var/www/html/php/Config.php
// database configuration
define('DB_USERNAME', 'goautodialu');
define('DB_PASSWORD', 'goautodialu1234');
define('DB_HOST', 'localhost');
define('DB_NAME', 'goautodial');
define('DB_PORT', '3306');
define('DB_NAME_ASTERISK', 'asterisk');
define('DB_USERNAME_KAMAILIO', 'kamailiou');
define('DB_PASSWORD_KAMAILIO', 'kamailiou1234');
define('DB_HOST_KAMAILIO', 'localhost');
define('DB_NAME_KAMAILIO', 'kamailio');
define('DB_PORT_KAMAILIO', '3306');
// other configuration parameters
define('CRM_ADMIN_EMAIL', '[email protected]');
?>
========================================
nano /var/www/html/php/goCRMAPISettings.php
define ('gourl', 'https://reply.viralcaption.com/goAPIv2');
define ('goUser', 'goAPI');
define ('responsetype', 'json');
define ('goPass', 'pWUc1vR0z/coUmzI.oxkLANmGD19c3m');
?>
========================================
cat /etc/kamailio/kamailio.cfg#!KAMAILIO #
#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_NAT
#!define WITH_ANTIFLOOD # #
- Kamailio (OpenSER) SIP Server v5.0 - default configuration script
- - web: http://www.kamailio.org
- - git: http://sip-router.org #
- Direct your questions about this file to: <[email protected]> #
- Refer to the Core CookBook at http://www.kamailio.org/wiki/
- for an explanation of possible statements, functions and parameters. #
- Several features can be enabled using '#!define WITH_FEATURE' directives: #
- *** To run in debug mode:
- - define WITH_DEBUG #
- *** To enable mysql:
- - define WITH_MYSQL #
- *** To enable authentication execute:
- - enable mysql
- - define WITH_AUTH
- - add users using 'kamctl' #
- *** To enable IP authentication execute:
- - enable mysql
- - enable authentication
- - define WITH_IPAUTH
- - add IP addresses with group id '1' to 'address' table #
- *** To enable persistent user location execute:
- - enable mysql
- - define WITH_USRLOCDB #
- *** To enable presence server execute:
- - enable mysql
- - define WITH_PRESENCE #
- *** To enable nat traversal execute:
- - define WITH_NAT
- - install RTPProxy: http://www.rtpproxy.org
- - start RTPProxy:
- rtpproxy -l your_public_ip -s udp:localhost:7722
- - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPING #
- *** To enable PSTN gateway routing execute:
- - define WITH_PSTN
- - set the value of pstn.gw_ip
- - check route[PSTN] for regexp routing condition #
- *** To enable database aliases lookup execute:
- - enable mysql
- - define WITH_ALIASDB #
- *** To enable speed dial lookup execute:
- - enable mysql
- - define WITH_SPEEDDIAL #
- *** To enable multi-domain support execute:
- - enable mysql
- - define WITH_MULTIDOMAIN #
- *** To enable TLS support execute:
- - adjust CFGDIR/tls.cfg as needed
- - define WITH_TLS #
- *** To enable XMLRPC support execute:
- - define WITH_XMLRPC
- - adjust route[XMLRPC] for access policy #
- *** To enable anti-flood detection execute:
- - adjust pike and htable=>ipban settings as needed (default is
- block if more than 16 requests in 2 seconds and ban for 300 seconds)
- - define WITH_ANTIFLOOD #
- *** To block 3XX redirect replies execute:
- - define WITH_BLOCK3XX #
- *** To enable VoiceMail routing execute:
- - define WITH_VOICEMAIL
- - set the value of voicemail.srv_ip
- - adjust the value of voicemail.srv_port #
- *** To enhance accounting execute:
- - enable mysql
- - define WITH_ACCDB
- - add following columns to database
#!ifdef ACCDB_COMMENT
ALTER TABLE acc ADD COLUMN src_user VARCHAR NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN src_domain VARCHAR NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default '';
ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN dst_user VARCHAR NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN dst_domain VARCHAR NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default '';
ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR NOT NULL DEFAULT '';
#!endif
- Include Local Config If Exists #########
import_file "kamailio-local.cfg"
- Defined Values #########
- *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL - - database URL - used to connect to database server by modules such
- as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL
#!define DBURL "mysql://kamailiou:kamailiou1234@localhost/kamailio"
#!endif
#!endif
#!ifdef WITH_MULTIDOMAIN - - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1
#!else
#!define MULTIDOMAIN 0
#!endif
- - flags
- FLT_ - per transaction (message) flags
- FLB_ - per branch flags
#!define FLT_ACC 1
#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3
#!define FLT_NATS 5
#!define FLB_NATB 6
#!define FLB_NATSIPPING 7
#!substdef "!MY_IP_ADDR!172.17.0.2!g"
#!substdef "!MY_DOMAIN!vaglxc01.goautodial.com!g"
#!substdef "!MY_WS_PORT!8080!g"
#!substdef "!MY_WSS_PORT!4443!g"
#!substdef "!MY_MSRP_PORT!9080!g"
#!substdef "!MY_WS_ADDR!tcp:MY_IP_ADDR:MY_WS_PORT!g"
#!substdef "!MY_WSS_ADDR!tls:MY_IP_ADDR:MY_WSS_PORT!g"
#!substdef "!MY_MSRP_ADDR!tls:MY_IP_ADDR:MY_MSRP_PORT!g"
#!substdef "!MSRP_MIN_EXPIRES!1800!g"
#!substdef "!MSRP_MAX_EXPIRES!3600!g"
#!define WITH_TLS
#!define WITH_WEBSOCKETS
#!define WITH_MSRP
- Global Parameters #########
- LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=no
#!else
debug=2
log_stderror=no
#!endif
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
fork=yes
children=4
/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes
/* uncomment the next line to disable the auto discovery of local aliases
based on reverse DNS on IPs (default on) */
#auto_aliases=no
/* add local domain aliases */
alias="172.17.0.2"
alias="vaglxc01.goautodial.com"
/* uncomment and configure the following line if you want Kamailio to
bind on a specific interface/port/proto (default bind on all available) */
listen=udp:127.0.0.1:5060
listen=udp:172.17.0.2:5060
/* port to listen to
* - can be specified more than once if needed to listen on many ports */
#port=5060
#!ifdef WITH_TLS
enable_tls=yes
#!endif
listen=MY_IP_ADDR
#!ifdef WITH_WEBSOCKETS
listen=MY_WS_ADDR
#!ifdef WITH_TLS
listen=MY_WSS_ADDR
#!endif
#!endif
#!ifdef WITH_MSRP
listen=MY_MSRP_ADDR
#!endif
tcp_connection_lifetime=3604
tcp_accept_no_cl=yes
tcp_rd_buf_size=16384
- life time of TCP connection when there is no traffic
- - a bit higher than registration expires to cope with UA behind NAT
#tcp_connection_lifetime=3605
- Custom Parameters #########
- These parameters can be modified runtime via RPC interface
- - see the documentation of 'cfg_rpc' module. #
- Format: group.id = value 'desc' description
- Access: $sel(cfg_get.group.id) or @cfg_get.group.id #
- PSTN GW Routing #
- - pstn.gw_ip: valid IP or hostname as string value, example:
- pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" #
- - by default is empty to avoid misrouting
pstn.gw_ip = "" desc "tos.cloud.goautodial.com GW Address"
pstn.gw_port = "" desc "PSTN GW Port"
#!endif
- VoiceMail Routing on offline, busy or no answer #
- - by default Voicemail server IP is empty to avoid misrouting
voicemail.srv_ip = "" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif
- don't advertise server headers
server_signature=no
sip_warning=0
- Modules Section ########
- set paths to location of modules (to sources or installation folders)
#!ifdef WITH_SRCPATH
mpath="modules/"
#!else
mpath="/usr/lib64/kamailio/modules/"
#mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"
#!endif
#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif
#loadmodule "topoh.so"
#loadmodule "mi_fifo.so"
loadmodule "jsonrpcs.so"
loadmodule "kex.so"
loadmodule "corex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "acc.so"
#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif
#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif
#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"
#!endif
#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif
#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpengine.so"
#loadmodule "rtpproxy.so"
#!endif
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
#!ifdef WITH_MSRP
loadmodule "msrp.so"
#loadmodule "htable.so"
loadmodule "cfgutils.so"
#!endif
#!ifdef WITH_WEBSOCKETS
loadmodule "xhttp.so"
loadmodule "websocket.so"
loadmodule "sdpops.so"
loadmodule "textopsx.so"
loadmodule "dialog.so"
loadmodule "sst.so"
#!endif
#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif
#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif
#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif
- ----------------- setting module-specific parameters ---------------
- ---- topoh params -----
#modparam("topoh", "mask_key", "Gu3ssWh@T1tS2016")
#modparam("topoh", "mask_ip", "10.0.0.1")
#modparam("topoh", "mask_callid", 1)
- ----- mi_fifo params -----
#modparam("mi_fifo", "fifo_name", "/var/run/kamailio/kamailio_fifo")
- ----- jsonrpcs params -----
modparam("jsonrpcs", "pretty_format", 1)
/* set the path to RPC fifo control file /
modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo")
/ set the path to RPC unix socket control file */
modparam("jsonrpcs", "dgram_socket", "/var/run/kamailio/kamailio_rpc.sock")
- ----- tm params -----
- auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3) - default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000) - default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)
- ----- rr params -----
- set next param to 1 to add value to ;lr param (helps with some UAs)
modparam("rr", "enable_full_lr", 0) - do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
- ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location /
modparam("registrar", "append_branches", 0)
/ uncomment the next line not to allow more than 100 contacts per AOR */
modparam("registrar", "max_contacts", 100) - max value for expires of registrations
modparam("registrar", "max_expires", 3600) - set it to 1 to enable GRUU
modparam("registrar", "gruu_enabled", 0)
- ----- acc params -----
/* what special events should be accounted ? /
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/ by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module /
modparam("acc", "detect_direction", 0)
/ account triggers (flags) /
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/ enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif
- ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 1)
modparam("usrloc", "use_domain", MULTIDOMAIN)
modparam("usrloc", "timer_interval", 60)
modparam("usrloc", "timer_procs", 4)
#!endif
- ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", 0)
modparam("auth_db", "password_column", "ha1")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)
modparam("auth", "nonce_count", 1) # enable nonce_count support
modparam("auth", "qop", "auth") # enable qop=auth
modparam("auth", "nonce_expire", 60)
modparam("auth", "nonce_auth_max_drift", 2)
- For REGISTER requests we hash the Request-URI, Call-ID, and source IP of the
- request into the nonce string. This ensures that the generated credentials
- cannot be used with another registrar, user agent with another source IP
- address or Call-ID. Note that user agents that change Call-ID with every
- REGISTER message will not be able to register if you enable this.
modparam("auth", "auth_checks_register", 11)
- For dialog-establishing requests (such as the original INVITE, OPTIONS, etc)
- we hash the Request-URI and source IP. Hashing Call-ID and From tags takes
- some extra precaution, because these checks could render some UA unusable.
modparam("auth", "auth_checks_no_dlg", 9)
- For mid-dialog requests, such as re-INVITE, we can hash source IP and
- Request-URI just like in the previous case. In addition to that we can hash
- Call-ID and From tag because these are fixed within a dialog and are
- guaranteed not to change. This settings effectively restrict the usage of
- generated credentials to a single user agent within a single dialog.
modparam("auth", "auth_checks_in_dlg", 15)
- ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif
#!endif
- ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif
- ----- speeddial params -----
#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif
- ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL) - register callback to match myself condition with domains list
modparam("domain", "register_myself", 1)
#!endif
- ----- presence params -----
modparam("presence", "db_url", DBURL)
- ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif
- ----- rtpengine params -----
modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:5066")
modparam("rtpengine", "rtpengine_disable_tout", 20)
#modparam("rtpengine", "db_url", DBURL)
- ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:[email protected]")
- params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif
- ----- tls params -----
modparam("tls", "config", "/etc/kamailio/tls.cfg")
#modparam("tls", "private_key", "/etc/httpd/certs/essentialSSL/wildcard.goautodial.com.key")
#modparam("tls", "certificate", "/etc/httpd/certs/essentialSSL/wildcard.goautodial.com.crt")
#modparam("tls", "ca_list", "/etc/httpd/certs/essentialSSL/wildcard.goautodial.com.ca-bundle")
#!endif
- ----- nathelper params -----
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") - Note: leaving NAT pings turned off here as nathelper is only being used for
- WebSocket connections. NAT pings are not needed as WebSockets have
- their own keep-alives.
modparam("dialog", "dlg_flag", 10)
modparam("dialog", "track_cseq_updates", 0)
modparam("dialog", "dlg_match_mode", 2)
- Set the sst modules timeout_avp to be the same value
modparam("sst", "timeout_avp", "$avp(i:10)")
modparam("sst", "sst_flag", 11)
#!endif
- ----- htable params -----
modparam("htable", "htable", "msrp=>size=8;autoexpire=MSRP_MAX_EXPIRES;")
#!endif
- ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 32)
modparam("pike", "remove_latency", 4)
- ----- htable params -----
- ip ban htable with autoexpire after 5 minutes
- modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif
- ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif
- ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
modparam("debugger", "log_level_name", "exec")
#!endif
- Routing Logic ########
- Main SIP request routing logic
- - processing of any incoming SIP request starts with this route
- - note: this is the same as route { ... }
request_route {- per request initial checks
route(REQINIT);
- per request initial checks
#!ifdef WITH_WEBSOCKETS
if (nat_uac_test(64)) {
# Do NAT traversal stuff for requests from a WebSocket
# connection - even if it is not behind a NAT!
# This won't be needed in the future if Kamailio and the
# WebSocket client support Outbound and Path.
force_rport();
if (is_method("REGISTER")) {
fix_nated_register();
} else {
if (!add_contact_alias()) {
xlog("L_ERR", "Error aliasing contact <$ct>\n");
sl_send_reply("400", "Bad Request");
exit;
}
}
}
#!endif
- NAT detection
route(NATDETECT);
- CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans()) {
route(RELAY);
}
exit;
}
- handle requests within SIP dialogs
route(WITHINDLG);
- only initial requests (no To tag)
- handle retransmissions
if(t_precheck_trans()) {
t_check_trans();
exit;
}
t_check_trans();
- authentication
route(AUTH);
- record routing for dialog forming requests (in case they are routed)
- - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE|SUBSCRIBE"))
record_route();
- account only INVITEs
if (is_method("INVITE")) {
setflag(FLT_ACC); # do accounting
setflag(10); # set the dialog flag
setflag(11); # Set the sst flag
}
if (is_method("UPDATE")) {
setflag(FLT_ACC); # do accounting
setflag(10); # set the dialog flag
setflag(11); # Set the sst flag
}
- dispatch requests to foreign domains
route(SIPOUT);
- requests for my local domains
- handle presence related requests
route(PRESENCE);
- handle registrations
route(REGISTRAR);
if ($rU==$null) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
- dispatch destinations to PSTN
route(PSTN);
- user location service
route(LOCATION);
route(RELAY);
}
- Wrapper for relaying requests
route[RELAY] { # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o.
if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH");
}
if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY");
}
if (is_method("INVITE")) {
dlg_manage();
route(SETUP_BY_TRANSPORT);
if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
route[SETUP_BY_TRANSPORT] {
if ($ru =~ "transport=ws") {
xlog("L_INFO", "Request going to WS");
if(sdp_with_transport("RTP/SAVPF")) {
xlog("L_INFO", "RTP/SAVPF detected");
rtpengine_manage("force trust-address replace-origin replace-session-connection ICE=force");
t_on_reply("REPLY_WS_TO_WS");
return;
}
rtpengine_manage("trust-address replace-origin replace-session-connection ICE=force RTP/SAVPF rtcp-mux-offer rtcp-mux-accept SDES-off");
t_on_reply("REPLY_FROM_WS");
}
else if ($proto =~ "ws") {
xlog("L_INFO", "Request coming from WS");
rtpengine_manage("RTP/AVP");
t_on_reply("REPLY_TO_WS");
}
else {
xlog("L_INFO", "This is a classic phone call");
rtpengine_manage("trust-address replace-origin replace-session-connection RTP/AVP");
t_on_reply("MANAGE_CLASSIC_REPLY");
}
}
onreply_route[REPLY_WS_TO_WS] {
xlog("L_INFO", "WS to WS");
if(status=~"[12][0-9][0-9]") {
rtpengine_manage("force trust-address replace-origin replace-session-connection ICE=force");
route(NATMANAGE);
}
}
onreply_route[REPLY_FROM_WS] {
xlog("L_INFO", "Reply from webrtc client: $rs");
if(status=~"[12][0-9][0-9]") {
rtpengine_manage("trust-address replace-origin replace-session-connection ICE=remove RTP/AVP rtcp-mux-offer rtcp-mux-accept SDES-off");
route(NATMANAGE);
}
}
onreply_route[REPLY_TO_WS] {
xlog("L_INFO", "Reply from softphone: $rs");
if (t_check_status("183")) {
change_reply_status("180", "Ringing");
remove_body();
exit;
}
if(!(status=~"[12][0-9][0-9]"))
return;
rtpengine_manage("froc+SP");
route(NATMANAGE);
}
onreply_route[MANAGE_CLASSIC_REPLY] {
xlog("L_INFO", "Boring reply from softphone: $rs");
if(status=~"[12][0-9][0-9]") {
xlog("L_INFO", "rtpengine_manage - trust-address replace-origin replace-session-connection RTP/AVP");
rtpengine_manage("trust-address replace-origin replace-session-connection RTP/AVP");
route(NATMANAGE);
}
}
- Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self)
if(src_ip!=myself) {
if($sht(ipban=>$si)!=$null) { # ip is already blocked
xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
exit;
}
if (!pike_check_req()) {
xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
$sht(ipban=>$si) = 1;
exit;
}
}
if($ua =~ "friendly-scanner") {
sl_send_reply("200", "OK");
exit;
}
#!endifif (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}if(is_method("OPTIONS") && uri==myself && $rU==$null) {
sl_send_reply("200","Keepalive");
exit;
}if(!sanity_check("1511", "7")) {
xlog("Malformed SIP message from $si:$sp\n");
exit;
}
}
- Handle requests within SIP dialogs
route[WITHINDLG] {
if (!has_totag()) return;- sequential request withing a dialog should
- take the path determined by record-routing
if (loose_route()) {
#!ifdef WITH_WEBSOCKETS
if ($du "") {
if (!handle_ruri_alias()) {
xlog("L_ERR", "Bad alias <$ru>\n");
sl_send_reply("400", "Bad Request");
exit;
}
}
#!endif
route(DLGURI);
if (is_method("BYE")) {
setflag(FLT_ACC); # do accounting ...
setflag(FLT_ACCFAILED); # ... even if the transaction fails
}
else if ( is_method("ACK") ) { # ACK is forwarded statelessy
route(NATMANAGE);
}
else if ( is_method("NOTIFY") ) { # Add Record-Route for in-dialog NOTIFY as per RFC 6665.
record_route();
}
route(RELAY);
exit;
}
if (is_method("SUBSCRIBE") && uri myself) { # in-dialog subscribe requests
route(PRESENCE);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server
route(RELAY);
exit;
} else { # ACK without matching transaction ... ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
exit;
}
- Handle SIP registrations
route[REGISTRAR] {
if (!is_method("REGISTER")) return;if(isflagset(FLT_NATS)) {
setbflag(FLB_NATB);
#!ifdef WITH_NATSIPPING # do SIP NAT pinging
setbflag(FLB_NATSIPPING);
#!endif
}
if (!save("location", "0x04"))
sl_reply_error();
exit;
}
- User location service
route[LOCATION] {
#!ifdef WITH_SPEEDDIAL
# search for short dialing - 2-digit extension
if($rU=~"^[0-9][0-9]$")
if(sd_lookup("speed_dial"))
route(SIPOUT);
#!endif
#!ifdef WITH_ALIASDB
# search in DB-based aliases
if(alias_db_lookup("dbaliases"))
route(SIPOUT);
#!endif
$avp(oexten) = $rU;
if (!lookup("location")) {
$var(rc) = $rc;
route(TOVOICEMAIL);
t_newtran();
switch ($var(rc)) {
case -1:
case -3:
send_reply("404", "Not Found");
exit;
case -2:
send_reply("405", "Method Not Allowed");
exit;
}
}
- when routing via usrloc, log the missed calls also
if (is_method("INVITE")) {
setflag(FLT_ACCMISSED);
}
- t_on_failure("UA_FAILURE");
route(RELAY);
exit;
}
- Presence server processing
route[PRESENCE] {
if(!is_method("PUBLISH|SUBSCRIBE"))
return;if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") {
route(TOVOICEMAIL); # returns here if no voicemail server is configured
sl_send_reply("404", "No voicemail service");
exit;
}
#!ifdef WITH_PRESENCE
if (!t_newtran()) {
sl_reply_error();
exit;
}
if(is_method("PUBLISH")) {
handle_publish();
t_release();
} else if(is_method("SUBSCRIBE")) {
handle_subscribe();
t_release();
}
exit;
#!endif
- if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==$null) {
sl_send_reply("404", "Not here");
exit;
}
return;
}
- IP authorization and user uthentication
route[AUTH] {
#!ifdef WITH_AUTH
#!ifdef WITH_IPAUTH
if((!is_method("REGISTER")) && allow_source_address()) {
# source IP allowed
return;
}
#!endif
if (is_method("REGISTER") || from_uri==myself)
{
# authenticate requests
if (!auth_check("$fd", "subscriber", "1")) {
auth_challenge("$fd", "0");
exit;
}
# user authenticated - remove auth header
if(!is_method("REGISTER|PUBLISH"))
consume_credentials();
}
- if caller is not local subscriber, then check if it calls
- a local destination, otherwise deny, not an open relay here
if (from_uri!=myself && uri!=myself) {
sl_send_reply("403","Not relaying");
exit;
}
#!endif
return;
}
- Caller NAT detection
route[NATDETECT] {
#!ifdef WITH_NAT
force_rport();
if (nat_uac_test("19")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else {
if(is_first_hop())
set_contact_alias();
}
setflag(FLT_NATS);
}
#!endif
return;
}
- RTPengine control and singaling updates for NAT traversal
route[NATMANAGE] {
#!ifdef WITH_NAT
if (is_request()) {
if(has_totag()) {
if(check_route_param("nat=yes")) {
setbflag(FLB_NATB);
}
}
}
if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB)))
return;if (is_request()) {
if (!has_totag()) {
if(t_is_branch_route()) {
add_rr_param(";nat=yes");
}
}
}
if (is_reply()) {
if(isbflagset(FLB_NATB)) {
if(is_first_hop())
set_contact_alias();
}
}
#!endif
return;
}
- URI update for dialog requests
route[DLGURI] {
#!ifdef WITH_NAT
if(!isdsturiset()) {
handle_ruri_alias();
}
#!endif
return;
}
- Routing to foreign domains
route[SIPOUT] {
if (uri==myself) return;append_hf("P-hint: outbound\r\n");
route(RELAY);
exit;
}
- PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN # check if PSTN GW IP is defined
if (strempty($sel(cfg_get.pstn.gw_ip))) {
xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n");
return;
}- route to PSTN dialed numbers starting with '+' or '00'
- (international format)
- - update the condition to match your dialing rules for PSTN routing
if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$"))
return;
- only local users allowed to call
if(from_uri!=myself) {
sl_send_reply("403", "Not Allowed");
exit;
}
if (strempty($sel(cfg_get.pstn.gw_port))) {
$ru = "sip:" + $rU + "" + $sel(cfg_get.pstn.gw_ip);
" + $sel(cfg_get.pstn.gw_ip) + ":"
} else {
$ru = "sip:" + $rU + "
+ $sel(cfg_get.pstn.gw_port);
}route(RELAY);
exit;
#!endifreturn;
}
- XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] { # allow XMLRPC from localhost
if ((method=="POST" || method=="GET")
&& (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response).
if ($hdr(User-Agent) =~ "xmlrpclib")
set_reply_close();
set_reply_no_connect();
dispatch_rpc();
exit;
}
send_reply("403", "Forbidden");
exit;
}
#!endif
- Routing to voicemail server
route[TOVOICEMAIL] {
#!ifdef WITH_VOICEMAIL
if(!is_method("INVITE|SUBSCRIBE"))
return;- check if VoiceMail server IP is defined
if (strempty($sel(cfg_get.voicemail.srv_ip))) {
xlog("SCRIPT: VoiceMail rotuing enabled but IP not defined\n");
return;
}
if(is_method("INVITE")) {
if($avp(oexten)==$null)
return;
$ru = "sip:" + $avp(oexten) + "" + $sel(cfg_get.voicemail.srv_ip)
" + $sel(cfg_get.voicemail.srv_ip)
+ ":" + $sel(cfg_get.voicemail.srv_port);
} else {
if($rU==$null)
return;
$ru = "sip:" + $rU + "
+ ":" + $sel(cfg_get.voicemail.srv_port);
}
route(RELAY);
exit;
#!endif
return;
} - check if VoiceMail server IP is defined
- Manage outgoing branches
branch_route[MANAGE_BRANCH] {
xdbg("new branch [$T_branch_idx] to $ru\n");
route(NATMANAGE);
}
- Manage incoming replies
onreply_route[MANAGE_REPLY] {
xdbg("incoming reply\n");
if(status=~"[12][0-9][0-9]")
route(NATMANAGE);
}
- Manage failure routing cases
failure_route[MANAGE_FAILURE] {
route(NATMANAGE);if (t_is_canceled()) {
exit;
}
#!ifdef WITH_BLOCK3XX
# block call redirect based on 3xx replies.
if (t_check_status("3[0-9][0-9]")) {
t_reply("404","Not found");
exit;
}
#!endif
#!ifdef WITH_VOICEMAIL
# serial forking
# - route to voicemail on busy or no answer (timeout)
if (t_check_status("486|408")) {
$du = $null;
route(TOVOICEMAIL);
exit;
}
#!endif
}
#!ifdef WITH_WEBSOCKETS
onreply_route {
if ((($Rp MY_WS_PORT || $Rp MY_WSS_PORT)
&& !(proto WS || proto WSS)) || $Rp == MY_MSRP_PORT) {
xlog("L_WARN", "SIP response received on $Rp\n");
drop;
exit;
}
if (nat_uac_test(64)) {
# Do NAT traversal stuff for replies to a WebSocket connection
# - even if it is not behind a NAT!
# This won't be needed in the future if Kamailio and the
# WebSocket client support Outbound and Path.
add_contact_alias();
}
}
event_route[xhttp:request] {
set_reply_close();
set_reply_no_connect();
if ($Rp != MY_WS_PORT
#!ifdef WITH_TLS
&& $Rp != MY_WSS_PORT
#!endif
) {
xlog("L_WARN", "HTTP request received on $Rp\n");
xhttp_reply("403", "Forbidden", "", "");
exit;
}
xlog("L_DBG", "HTTP Request Received\n");
if ($hdr(Upgrade)=~"websocket"
&& $hdr(Connection)=~"Upgrade"
&& $rm=~"GET") {
- Validate Host - make sure the client is using the correct
- alias for WebSockets
- Sasa: commented out, see http://sip-router.1086192.n5.nabble.com/Testing-the-Websocket-module-with-sipml5-org-td65069.html
#if ($hdr(Host) == $null || !is_myself("sip:" + $hdr(Host))) { - xlog("L_WARN", "Bad host $hdr(Host)\n");
- xhttp_reply("403", "Forbidden", "", "");
- exit;
#}
- Optional... validate Origin - make sure the client is from an
- authorised website. For example, #
- if ($hdr(Origin) != "http://communicator.MY_DOMAIN"
- && $hdr(Origin) != "https://communicator.MY_DOMAIN") {
- xlog("L_WARN", "Unauthorised client $hdr(Origin)\n");
- xhttp_reply("403", "Forbidden", "", "");
- exit;
- }
- Optional... perform HTTP authentication
- ws_handle_handshake() exits (no further configuration file
- processing of the request) when complete.
if (ws_handle_handshake()) { # Optional... cache some information about the # successful connection
exit;
}
}
xhttp_reply("404", "Not Found", "", "");
}
event_route[websocket:closed] {
xlog("L_INFO", "WebSocket connection from $si:$sp has closed\n");
}
failure_route[UA_FAILURE] {
xlog("L_INFO", "Triggered UA_FAILURE\n");
if (t_check_status("488") && sdp_content()) {
if (sdp_get_line_startswith("$avp(mline)", "m=")) {
if ($avp(mline) =~ "SAVPF") {
$avp(rtpengine_offer_flags) = "froc-sp";
$avp(rtpengine_answer_flags) = "froc+SP";
} else {
$avp(rtpengine_offer_flags) = "froc+SP";
$avp(rtpengine_answer_flags) = "froc-sp";
}
}
append_branch();
rtpengine_offer($avp(rtpengine_offer_flags));
t_on_reply("RTPPROXY_REPLY");
route(RELAY);
}
}
onreply_route[RTPPROXY_REPLY] {
xlog("L_INFO", "Triggered RTPPROXY_REPLY\n");
if (status =~ "1803") {
change_reply_status(180, "Ringing");
remove_body();
} else if (status =~ "2[0-9][0-9]" && sdp_content()) {
rtpengine_answer($avp(rtpengine_answer_flags));
}
}
#!endif
#!ifdef WITH_MSRP
event_route[msrp:frame-in] {
msrp_reply_flags("1");
if ((($Rp MY_WS_PORT || $Rp MY_WSS_PORT)
&& !(proto WS || proto WSS)) && $Rp != MY_MSRP_PORT) {
xlog("L_WARN", "MSRP request received on $Rp\n");
msrp_reply("403", "Action-not-allowed");
exit;
}
if (msrp_is_reply()) {
msrp_relay();
} else if($msrp(method)=="AUTH") {
if($msrp(nexthops)>0) {
msrp_relay();
exit;
}
if (!www_authenticate("MY_DOMAIN", "subscriber",
"$msrp(method)")) {
if (auth_get_www_authenticate("MY_DOMAIN", "1",
"$var(wauth)")) {
msrp_reply("401", "Unauthorized",
"$var(wauth)");
} else {
msrp_reply("500", "Server Error");
}
exit;
}
if ($hdr(Expires) != $null) {
$var(expires) = (int) $hdr(Expires);
if ($var(expires) < MSRP_MIN_EXPIRES) {
msrp_reply("423", "Interval Out-of-Bounds",
"Min-Expires: MSRP_MIN_EXPIRES\r\n");
exit;
} else if ($var(expires) > MSRP_MAX_EXPIRES) {
msrp_reply("423", "Interval Out-of-Bounds",
"Max-Expires: MSRP_MAX_EXPIRES\r\n");
exit;
}
} else {
$var(expires) = MSRP_MAX_EXPIRES;
}
$var(cnt) = $var(cnt) + 1;pv_printf("$var(sessid)", "s.$(pp).$(var(cnt)).$(RANDOM)");
$sht(msrp=>$var(sessid)::srcaddr) = $msrp(srcaddr);
$sht(msrp=>$var(sessid)::srcsock) = $msrp(srcsock);
$shtex(msrp=>$var(sessid)) = $var(expires) + 5;
- - Use-Path: the MSRP address for server + session id
$var(hdrs) = "Use-Path: msrps://MY_IP_ADDR:MY_MSRP_PORT/"
+ $var(sessid) + ";tcp\r\n"
+ "Expires: " + $var(expires) + "\r\n";
msrp_reply("200", "OK", "$var(hdrs)");
} else if ($msrp(method)=="SEND" || $msrp(method)=="REPORT") {
if ($msrp(nexthops)>1) {
if ($msrp(method)!="REPORT") {
msrp_reply("200", "OK");
}
msrp_relay();
exit;
}
$var(sessid) = $msrp(sessid);
if ($sht(msrp=>$var(sessid)::srcaddr) == $null) { # one more hop, but we don't have address in htable
msrp_reply("481", "Session-does-not-exist");
exit;
} else if ($msrp(method)!="REPORT") {
msrp_reply("200", "OK");
}
msrp_relay_flags("1");
msrp_set_dst("$sht(msrp=>$var(sessid)::srcaddr)",
"$sht(msrp=>$var(sessid)::srcsock)");
msrp_relay();
} else {
msrp_reply("501", "Request-method-not-understood");
}
}
#!endif
================================================
cat /etc/rtpengine/rtpengine.conf
[rtpengine]
- no-fallback = false
- for userspace forwarding only:
- table = -1
- a single interface:
interface = 172.17.0.2 - separate multiple interfaces with semicolons:
- interface = internal/12.23.34.45;external/23.34.45.54
- for different advertised address:
- interface = 12.23.34.45!23.34.45.56
- listen-tcp = 25060
- listen-udp = 12222
silent-timeout = 3600
tos = 184
#control-tos = 184
- delete-delay = 30
- final-timeout = 10800
- foreground = false
- pidfile = /var/run/ngcp-rtpengine-daemon.pid
- num-threads = 16
port-max = 50000
- max-sessions = 5000
- recording-dir = /var/spool/rtpengine
- recording-method = proc
- recording-format = raw
- redis = 127.0.0.1:6379/5
- redis-write = [email protected]:6379/42
- redis-num-threads = 8
- no-redis-required = false
- redis-expires = 86400
- redis-allowed-errors = -1
- redis-disable-time = 10
- redis-cmd-timeout = 0
- redis-connect-timeout = 1000
- b2b-url = http://127.0.0.1:8090/
- xmlrpc-format = 0
- log-level = 6
- log-stderr = false
- log-facility = daemon
- log-facility-cdr = local0
- log-facility-rtcp = local1
- graphite = 127.0.0.1:9006
- graphite-interval = 60
- graphite-prefix = foobar.
- homer = 172.17.0.2:65432
- homer-protocol = udp
- homer-id = 2001
- sip-source = false
- dtls-passive = false
#[rtpengine-testing]
#table = -1
#interface = 10.15.20.121
#listen-ng = 2223
#foreground = true
#log-stderr = true
#log-level = 7
==============================================
cat /etc/asterisk/sip.conf
[general]
context=trunkinbound ; Default context for incoming calls
allowguest=no ; Allow or reject guest calls (default is yes)
allowoverlap=no ; Disable overlap dialing support. (Default is yes)
;allowtransfer=no ; Disable all transfers (unless enabled in peers or users)
;realm=mydomain.tld ; Realm for digest authentication
bindport=5070 ; UDP Port to bind to (SIP standard port is 5060)
bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all)
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
;domain=mydomain.tld ; Set default domain for this host
;pedantic=yes ; Enable checking of tags in headers,
;tos_sip=cs3 ; Sets TOS for SIP packets.
;tos_audio=ef ; Sets TOS for RTP audio packets.
;tos_video=af41 ; Sets TOS for RTP video packets.
;maxexpiry=3600 ; Maximum allowed time of incoming registrations
;minexpiry=60 ; Minimum length of registrations/subscriptions (default 60)
;defaultexpiry=120 ; Default length of incoming/outgoing registration
;t1min=100 ; Minimum roundtrip time for messages to monitored hosts
;notifymimetype=text/plain ; Allow overriding of mime type in MWI NOTIFY
;checkmwi=10 ; Default time between mailbox checks for peers
;buggymwi=no ; Cisco SIP firmware doesn't support the MWI RFC
;vmexten=voicemail ; dialplan extension to reach mailbox sets the
disallow=all ; First disallow all codecs
allow=ulaw ; Allow codecs in order of preference
allow=gsm
mohinterpret=default
mohsuggest=default
language=en ; Default language setting for all users/peers
relaxdtmf=yes ; Relax dtmf handling
trustrpid = no ; If Remote-Party-ID should be trusted
sendrpid = yes ; If Remote-Party-ID should be sent
progressinband=no ; If we should generate in-band ringing always
;useragent=Asterisk PBX ; Allows you to change the user agent string
;promiscredir = no ; If yes, allows 302 or REDIR to non-local SIP address
;usereqphone = no ; If yes, ";user=phone" is added to uri that contains
dtmfmode = rfc2833 ; Set default dtmfmode for sending DTMF. Default: rfc2833
;compactheaders = yes ; send compact sip headers.
videosupport=no ; Turn on support for SIP video. You need to turn this on
;maxcallbitrate=384 ; Maximum bitrate for video calls (default 384 kb/s)
callevents=yes ; generate manager events when sip ua
;alwaysauthreject = yes ; When an incoming INVITE or REGISTER is to be rejected,
;g726nonstandard = yes ; If the peer negotiates G726-32 audio, use AAL2 packing
;matchexterniplocally = yes ; Only substitute the externip or externhost setting if it matches
;regcontext=sipregistrations
rtptimeout=20 ; Terminate call if 60 seconds of no RTP or RTCP activity
rtpholdtimeout=300 ; Terminate call if 300 seconds of no RTP or RTCP activity
;rtpkeepalive=<secs> ; Send keepalives in the RTP stream to keep NAT open
;sipdebug = yes ; Turn on SIP debugging by default, from
;recordhistory=yes ; Record SIP history by default
;dumphistory=yes ; Dump SIP history at end of SIP dialogue
;allowsubscribe=no ; Disable support for subscriptions. (Default is yes)
;subscribecontext = default ; Set a specific context for SUBSCRIBE requests
notifyringing = yes ; Notify subscriptions on RINGING state (default: no)
notifyhold = yes ; Notify subscriptions on HOLD state (default: no)
limitonpeers = yes ; Apply call limits on peers only. This will improve
;t38pt_udptl = yes ; Default false
;register => 1234:[email protected]
;registertimeout=20 ; retry registration calls every 20 seconds (default)
;registerattempts=10 ; Number of registration attempts before we give up
;externip = 192.168.1.1 ; Address that we're going to put in outbound SIP
;externhost=test.test.com ; Alternatively you can specify a domain
;externrefresh=10 ; How often to refresh externhost if
;localnet=192.168.0.0/255.255.0.0; All RFC 1918 addresses are local networks
;localnet=10.0.0.0/255.0.0.0 ; Also RFC1918
;localnet=172.16.0.0/12 ; Another RFC1918 with CIDR notation
;localnet=169.254.0.0/255.255.0.0 ;Zero conf local network
nat=force_rport,comedia ; Global NAT settings (Affects all peers and users)
canreinvite=no ; Asterisk by default tries to redirect the
;directrtpsetup=yes ; Enable the new experimental direct RTP setup. This sets up
;rtcachefriends=yes ; Cache realtime friends by adding them to the internal list
;rtsavesysname=yes ; Save systemname in realtime database at registration
;rtupdate=yes ; Send registry updates to database using realtime? (yes|no)
;rtautoclear=yes ; Auto-Expire friends created on the fly on the same schedule
;ignoreregexpire=yes ; Enabling this setting has two functions:
;domain=mydomain.tld,mydomain-incoming
;domain=1.2.3.4 ; Add IP address as local domain
;allowexternaldomains=no ; Disable INVITE and REFER to non-local domains
;autodomain=yes ; Turn this on to have Asterisk add local host
;fromdomain=mydomain.tld ; When making outbound SIP INVITEs to
jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
jbforce = no ; Forces the use of a jitterbuffer on the receive side of a SIP
jbmaxsize = 100 ; Max length of the jitterbuffer in milliseconds.
jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a SIP
jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
qualify=yes ; By default, qualify all peers at 2000ms
limitonpeer = yes ; enable call limit on a per peer basis, different from limitonpeers
session-timers=refuse ; Refuse WebRTC session timers
#include sip-vicidial.conf
#include sip-goautodial.conf
; register SIP account on remote machine if using SIP trunks
; register => testSIPtrunk:[email protected]:5060
;
; setup account for SIP trunking:
; [SIPtrunk]
; disallow=all
; allow=ulaw
; allow=alaw
; type=friend
; username=testSIPtrunk
; secret=test
; host=10.10.10.16
; dtmfmode=inband
; qualify=1000
==================================================================
GoAdmin Administration Settings & GoWebRTC Settings
==========================================
ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.17.0.2 netmask 255.255.0.0 broadcast 0.0.0.0
ether 02:42:ac:11:00:02 txqueuelen 0 (Ethernet)
RX packets 24009 bytes 8315178 (7.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 25358 bytes 19021925 (18.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 31591 bytes 14254207 (13.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 31591 bytes 14254207 (13.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
====================================================
I note this : am not sure if it is related!
rtpengine
[1700624745.233173] ERR: FAILED TO CREATE KERNEL TABLE 0 (No such file or directory), KERNEL FORWARDING DISABLED
Please help.
Replies (34)
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by Wittie Manansala 9 months ago
Try to coordinate your issue with your VOIP Provder by providing your carrier settings and asterisk logs. They might suggest settings or require configurations such as dial prefixes, ANI, or codecs.
Additionally, could you also provide us with screenshots of the agent interface and asterisk CLI logs from agent login to call, along with carrier settings screenshots?
Note:
Please ensure that any sensitive information is redacted or covered. Confirm that this forum is set to be public or visible to others.
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by beshoo beshoo 9 months ago
Wittie Manansala wrote in RE: Docker and Goautodial , Registration Failed - Rejected:
Try to coordinate your issue with your VOIP Provder by providing your carrier settings and asterisk logs. They might suggest settings or require configurations such as dial prefixes, ANI, or codecs.
Additionally, could you also provide us with screenshots of the agent interface and asterisk CLI logs from agent login to call, along with carrier settings screenshots?
Note:
Please ensure that any sensitive information is redacted or covered. Confirm that this forum is set to be public or visible to others.
One of the users on asterisk community aside:
https://community.asterisk.org/t/can-not-make-any-outbound-call-goautodile/100073
It looks like you have the wrong dialplan entry along with possibly a bad caller id. look up trunk configurations for Go Autodial and see where you are wrong
I don't understand what the problem might be in the dialplan!
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by Wittie Manansala 9 months ago
It seems like there might be an issue with the dial plan, just to be sure. Please coordinate with your VoIP provider to check if there are any required dial prefixes and dial formats. Also, could you provide a screenshot when dialing so it can be reviewed thoroughly and campaign settings?
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by beshoo beshoo 9 months ago
Wittie Manansala wrote in RE: Docker and Goautodial , Registration Failed - Rejected:
It seems like there might be an issue with the dial plan, just to be sure. Please coordinate with your VoIP provider to check if there are any required dial prefixes and dial formats. Also, could you provide a screenshot when dialing so it can be reviewed thoroughly and campaign settings?
I contacted the provider, they do not have any prefixes, and they don't understand what "dial plan" is, they just say we support asterisk and Zoiper.
Now regarding campaign settings:
Here is a recording video
https://viralcaption.com/vv.mp4
and here is a screenshots
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by beshoo beshoo 9 months ago
New Update:
I changed the Account Entry to :
[ukrcall] allow=alaw allow=ulaw type=friend dtmfmode=rfc2833 context=trunkinbound qualify=yes nat=yes host=sip.ukrcall.net username=3808XXXXX96 secret=*******
Dialplan Entry
exten => _847.,1,AGI(agi://127.0.0.1:4577/call_log) exten => _847.,2,Dial(SIP/${EXTEN:3}@ukrcall,,tTo) exten => _847.,3,Hangup
And in the campaign setting, I chose the Carrier to use for Campaign: => ukrcall
Am not sure why it was on
__________________________________________
Now I can hear the calling to the VOIP provider
But unfortunately, they said I was calling the wrong number which is not correct. here is the log
am calling 963933209505
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by beshoo beshoo 9 months ago
Update
I got a reply from the provider...
_
The number must be dialed in the format 00963933209505
You dialed without 00, that is, 963933209505
Please, try to dial in format 00963933209505
So how that can be set in goautodial?
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by beshoo beshoo 9 months ago
beshoo beshoo wrote in RE: Docker and Goautodial , Registration Failed - Rejected:
Update
I got a reply from the provider...
_The number must be dialed in the format 00963933209505
You dialed without 00, that is, 963933209505Please, try to dial in format 00963933209505
So how that can be set in goautodial?
SOLVED:
We add 00 to the exten => _847.,2,Dial(SIP/ 00 ${EXTEN:3}@ukrcall,,tTo)
---------------
exten => _847.,1,AGI(agi://127.0.0.1:4577/call_log) exten => _847.,2,Dial(SIP/ 00${EXTEN:3}@ukrcall,,tTo) exten => _847.,3,Hangup
I can now call , am testing to see the voice quality
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by beshoo beshoo 9 months ago
SOLVED. Thank you for your help, I can do outbound call!
RE: Docker and Goautodial , Registration Failed - Rejected
-
Added by Wittie Manansala 9 months ago
It's good to hear, and thank you for sharing how you fixed your issue.
- « Previous
- 1
- 2
- Next »