Project

General

Profile

Forums » Open discussion »

How to apply the public IP? My asterisk continuously send local IP in SIP packets

Added by torontob torontob over 8 years ago

Hi everyone,

I do NOT have a public IP interface. I only have a local IP like 192.168.2.5 for GoAutoDial server. I do have a public IP that NAT forwards to GoAutoDial server. I have tried to enter externhost=xx.xx.xx.xx (my public IP) in /etc/asterisk/sip_nat.conf and also in server settings on GoAutoDial GUI but it seems to not work. Whenever I check the Asterisk SIP packets I still see the 192.168.2.5 sent which naturally results in no authentication etc...

What are the steps I have to take to make sure my public IP is sent in SIP packets?

Thanks,


Replies (3)

RE: How to apply the public IP? My asterisk continuously send local IP in SIP packets - Added by striker 247 over 8 years ago

hi

in sip.conf enter externip=yourpublicip
and also in sip carrier settings use nat=yes

br
striker
www.striker24x7.blogspot.com

RE: How to apply the public IP? My asterisk continuously send local IP in SIP packets - Added by torontob torontob over 8 years ago

I have done both of those and it fails as in I still see my local ip in the packets. It seems like sip.conf changes has no effect on the system.

RE: How to apply the public IP? My asterisk continuously send local IP in SIP packets - Added by Jefferson Varias over 8 years ago

Hi,

You can try to reload or restart your asterisk after making changes on sip.conf.

Thanks

    (1-3/3)     Go to top