Project

General

Profile

Forums » Open discussion »

PRI DIAL PLAN NOT WORKING

Added by VINISH VIJAYAN almost 9 years ago

Hi,

Pl help me to configure dial plan.

1) I am using Sangoma PRI card and wanpipe is configured and group is g0.
2) pri show spans showing Status UP
3) Error log

chan_sip.c:23534 handle_request_invite: Call from '8001' (182.71.107.198:40488) to extension '919560302445' rejected because extension not found in context 'default'.

dial Plan configured

exten => _91.,1,AGI
exten => _91.,2,Dial(DAHDI/g0/${EXTEN:1},,Tto)
exten => _91.,3,Hangup()


Replies (3)

RE: PRI DIAL PLAN NOT WORKING - Added by striker 247 almost 9 years ago

make sure your dialplan has been updated in the asterisk
type
asterisk -rx "dialplan show 919560302445@default"

if it shows empty then either you have not updated the new ip of the goautodial in db

run the below command to update the newly updated ip
/usr/share/astguiclient/ADMIN_update_server_ip.pl

br
striker
www.striker24x7.blogspot.com

RE: PRI DIAL PLAN NOT WORKING - Added by VINISH VIJAYAN almost 9 years ago

Hi
asterisk -rx "dialplan show 919560302445@default" command showing below message.

[root@go ~]# asterisk -rx "dialplan show 919560302445@default"
There is no existence of 919560302445@default extension
Command 'dialplan show 919560302445@default' failed.

and already updated server ip-address

RE: PRI DIAL PLAN NOT WORKING - Added by striker 247 almost 9 years ago

seems your dialplan not executed in asterisk conf file

make sure you have update the ip by running /usr/share/astguiclient/ADMIN_update_server_ip.pl

br
striker
www.striker24x7.blogspot.com

    (1-3/3)     Go to top