HOW TO SET A STATIC IP ON GO AUTO DIAL CE 2.0 SERVER? ((NEWBIEE))
Replies (5)
RE: HOW TO SET A STATIC IP ON GO AUTO DIAL CE 2.0 SERVER? ((NEWBIEE))
-
Added by gbinfosys gbinfosys over 11 years ago
Please open http://www.gbinfosys.com/ at your browser and then go to blog section. Please read the article "How to setup a net work in Linux" and do it your self.
Ami
RE: HOW TO SET A STATIC IP ON GO AUTO DIAL CE 2.0 SERVER? ((NEWBIEE))
-
Added by Levy Ryan Nolasco over 11 years ago
Hi,
Good day! Please see the answers below.
1. Please follow this link http://goautodial.org/projects/goautodialce/wiki/Goautodial_Getting_Started_Guide "Configure Default Gateway". Static IP: Your static IP, Netmask: 255.255.255.0, Default Gateway:Provided by your ISP or use the "OPEN DNS IP".
2. From you ISP or you can set the "OPEN DNS IP"
3. Please see the answer from question #1.
4. If you will follow carefully the Getting Started Guide your dialer will be up and running soon.
RE: HOW TO SET A STATIC IP ON GO AUTO DIAL CE 2.0 SERVER? ((NEWBIEE))
-
Added by Matt Rosario over 11 years ago
1) I have a Static IP, How do I have to set my eth0 & what Info Do I have to fill in that (EX: Static IP…???, Netmask…?, Default Gateway…?
2) And In “EDIT DNS” How do I need to set Primary, Secondary & Teritary DNS (Where Can I get my Primary, secondary or terriraty DNS???) I know its silly Pls help me out.
3) EX; Static IP: XXX.XX.XX.XX? Where and all do I have to set this IP in etho config?
4) Pls dont send me the starter guide link I tried but there’s no Specific Info on how to assign Static IP
AGENT COMP
IP: 192.168.0.100
SUBNET MASK: 255.255.255.0
DG: 192.168.0.1
STATIC IP: XXX.XX.XX.X0
SUBNET MASK: 255.255.255.0
DG: XXX.XX.XX.DG
DNS: XXX.XX.XX.DNS1,, XXX.XX.XX.DNS2
1) Login
root
vicidialnow
2) Setup
Network configuration option
And then “EDIT DEVICES”
Network card eth0
THIS IS WHERE I WILL GET CONFUSED?!
Name: eth0
Device: eth0
Use DHCP: [ ] Unchecked
STATIC IP: XXX.XX.XX.STIP
NETMASK: 255.255.255.0
DEF GATWAY: XXX.XX.XX.DG
And then ‘OK’
EDIT DNS configuration
Hostname: capricon.tld
Primary DNS: XXX.XX.XX.DNS1
Secondary DNS: XXX.XX.XX.DNS2
Tertiary DNS: 4.2.2.2 (OPEN DNS)
NEXT, [root@vici ~]# service network restart
& Updating Server IP [root@vici ~]# update_server_ip
After doing all these things I’m not able to open page in browser from anywhere.
Pls correct me, Let me know If i’m doing any mistake.
Levy Ryan Nolasco wrote:
Hi,
Good day! Please see the answers below.
1. Please follow this link http://goautodial.org/projects/goautodialce/wiki/Goautodial_Getting_Started_Guide "Configure Default Gateway". Static IP: Your static IP, Netmask: 255.255.255.0, Default Gateway:Provided by your ISP or use the "OPEN DNS IP".2. From you ISP or you can set the "OPEN DNS IP"
3. Please see the answer from question #1.
4. If you will follow carefully the Getting Started Guide your dialer will be up and running soon.
RE: HOW TO SET A STATIC IP ON GO AUTO DIAL CE 2.0 SERVER? ((NEWBIEE))
-
Added by Matt Rosario over 11 years ago
1) I have a Static IP, How do I have to set my eth0 & what Info Do I have to fill in that (EX: Static IP…???, Netmask…?, Default Gateway…?
2) And In “EDIT DNS” How do I need to set Primary, Secondary & Teritary DNS (Where Can I get my Primary, secondary or terriraty DNS???) I know its silly Pls help me out.
3) EX; Static IP: XXX.XX.XX.XX? Where and all do I have to set this IP in etho config?
4) Pls dont send me the starter guide link I tried but there’s no Specific Info on how to assign Static IP
AGENT COMP
IP: 192.168.0.100
SUBNET MASK: 255.255.255.0
DG: 192.168.0.1
STATIC IP: XXX.XX.XX.X0
SUBNET MASK: 255.255.255.0
DG: XXX.XX.XX.DG
DNS: XXX.XX.XX.DNS1,, XXX.XX.XX.DNS2
1) Login
root
vicidialnow
2) Setup
Network configuration option
And then “EDIT DEVICES”
Network card eth0
THIS IS WHERE I WILL GET CONFUSED?!
Name: eth0
Device: eth0
Use DHCP: [ ] Unchecked
STATIC IP: XXX.XX.XX.STIP
NETMASK: 255.255.255.0
DEF GATWAY: XXX.XX.XX.DG
And then ‘OK’
EDIT DNS configuration
Hostname: capricon.tld
Primary DNS: XXX.XX.XX.DNS1
Secondary DNS: XXX.XX.XX.DNS2
Tertiary DNS: 4.2.2.2 (OPEN DNS)
NEXT, [root@vici ~]# service network restart
& Updating Server IP [root@vici ~]# update_server_ip
After doing all these things I’m not able to open page in browser from anywhere.
Pls correct me, Let me know If i’m doing any mistake.
gbinfosys gbinfosys wrote:
Please open http://www.gbinfosys.com/ at your browser and then go to blog section. Please read the article "How to setup a net work in Linux" and do it your self.
Ami
RE: HOW TO SET A STATIC IP ON GO AUTO DIAL CE 2.0 SERVER? ((NEWBIEE))
-
Added by Levy Ryan Nolasco over 11 years ago
Hi,
Please see the details below.
THIS IS WHERE I WILL GET CONFUSED?!
Name: eth0
Device: eth0
Use DHCP: [ ] Unchecked
STATIC IP: XXX.XX.XX.STIP - 192.168.0.2 or any IP that is not the same with your gateway.
NETMASK: 255.255.255.0
DEF GATWAY: XXX.XX.XX.DG - 192.168.0.1
And then ‘OK’
EDIT DNS configuration
Hostname: capricon.tld
Primary DNS: XXX.XX.XX.DNS1 - 8.8.8.8 - or DNS provided by your ISP
Secondary DNS: XXX.XX.XX.DNS2 - 208.67.222.222 or DNS provided by your ISP
Tertiary DNS: 4.2.2.2 (OPEN DNS)
NEXT, [root@vici ~]# service network restart
& Updating Server IP [root@vici ~]# update_server_ip - Please check carefully the IP adress. Make sure the IP address is the same as what you have set on your Eth0.